1.0727
2018-04-02 17:17:31
We are a professional manufacturer of 1.0727, we can provide the third party inspection report and datasheet of 1.0727 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in 1.0727. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: 45S20| Material No.: 1.0727
CHEMICAL COMPOSITION(1.0727):
C(％) : 0.42～0.50
Si(％) : ≤0.40
Mn(％) : 0.70～1.10
P(％)≤: 0.06
S(％)≤: 0.15～0.25
Pb(％) : —
MECHANICAL PROPERTIES (1.0727):
Condition : 840～870℃Normalizing
Size/mm : ≤16mm
Tensile Strength|σb/MPa : 580～700
Yield Strength|σs≥/MPa : 335
Extensibility|δ(％)≥: —
Hardness HBS≤: —
Remark(1.0727):
①, This steel grade is according to DIN17200(1987) and revised by DINEN10083-1+2(1991).
②, We can supply other steel also which sulphur composition is 0.020％～0.040％, and it will be added "S" at the back of steel grade.
③, The balance of Cr+Mo+Ni is under 0.63％.
④, It is mechanical properties after hardening and tempering in this table.
⑤, The test sample is according to DVM-V.
Please find the PDF for 1.0727
Introduction Free cutting steel (1.0727)
Free cutting steel is a kind of alloy steel that adds a certain amount of one or more sulfur, phosphorus, lead, calcium, selenium, tellurium and other free cutting elements in steel to improve its machinability. With the automation, speed and precision of cutting process, it is very important for steel to have good machinability. This kind of steel is mainly used for machining on automatic cutting machine tools, so it is also a special steel.
Characteristic (1.0727)
1.: the product has good processing performance and smooth cutting, material quality, processing stability, microstructure, chemical composition and stability, small deviation, the purity of steel net, low inclusion content, is not easy to damage the tool features; easily in lathe cutting, tool life and production efficiency are increased by 40%;
2. electroplating performance: cutting is very easy; drilling deep hole, deep groove milling; machining efficiency of conventional steel can greatly improve the performance of the product; electroplating, can replace copper products, greatly reduce the cost of product;
3. good finish: the surface finish of the workpiece after being processed by car is good.
4. environmental protection: comply with the EU SGS environmental certification standards, and through the Swiss environmental certification. Products can export machinery and equipment: woodworking machinery, ceramic machinery, papermaking machinery, glass machinery, food machinery, building machinery, plastic machinery, textile machinery, Jack, hydraulic press and so on.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, 1.0727
Steel Grade: 45S20| Material No.: 1.0727
CHEMICAL COMPOSITION(1.0727):
C(％) : 0.42～0.50
Si(％) : ≤0.40
Mn(％) : 0.70～1.10
P(％)≤: 0.06
S(％)≤: 0.15～0.25
Pb(％) : —
MECHANICAL PROPERTIES (1.0727):
Condition : 840～870℃Normalizing
Size/mm : ≤16mm
Tensile Strength|σb/MPa : 580～700
Yield Strength|σs≥/MPa : 335
Extensibility|δ(％)≥: —
Hardness HBS≤: —
Remark(1.0727):
①, This steel grade is according to DIN17200(1987) and revised by DINEN10083-1+2(1991).
②, We can supply other steel also which sulphur composition is 0.020％～0.040％, and it will be added "S" at the back of steel grade.
③, The balance of Cr+Mo+Ni is under 0.63％.
④, It is mechanical properties after hardening and tempering in this table.
⑤, The test sample is according to DVM-V.
Please find the PDF for 1.0727
Introduction Free cutting steel (1.0727)
Free cutting steel is a kind of alloy steel that adds a certain amount of one or more sulfur, phosphorus, lead, calcium, selenium, tellurium and other free cutting elements in steel to improve its machinability. With the automation, speed and precision of cutting process, it is very important for steel to have good machinability. This kind of steel is mainly used for machining on automatic cutting machine tools, so it is also a special steel.
Characteristic (1.0727)
1.: the product has good processing performance and smooth cutting, material quality, processing stability, microstructure, chemical composition and stability, small deviation, the purity of steel net, low inclusion content, is not easy to damage the tool features; easily in lathe cutting, tool life and production efficiency are increased by 40%;
2. electroplating performance: cutting is very easy; drilling deep hole, deep groove milling; machining efficiency of conventional steel can greatly improve the performance of the product; electroplating, can replace copper products, greatly reduce the cost of product;
3. good finish: the surface finish of the workpiece after being processed by car is good.
4. environmental protection: comply with the EU SGS environmental certification standards, and through the Swiss environmental certification. Products can export machinery and equipment: woodworking machinery, ceramic machinery, papermaking machinery, glass machinery, food machinery, building machinery, plastic machinery, textile machinery, Jack, hydraulic press and so on.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, 1.0727
