Our company's existing 42CrMo5-6 round steel stock 36 tons, including Φ75-3.84 tons, Φ80-17 tons, Φ85-15.8 tons, we can sales as clearance price of USD950/ tons, we can also roll for other small specifications round bar as customer' requirement, welcome to purchase.
We are a professional manufacturer of 42CrMo5-6, we can provide the third party inspection report and datasheet of 42CrMo5-6 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in 42CrMo5-6. We will serve you with honesty, integrity, and professional. The detail data as below follow:

Steel Grade: 42CrMo5-6 | Material No.: 1.7233
CHEMICAL COMPOSITION(42CrMo5-6):
C(％) :        0.39～0.45
Si (％):        ≤0.40
Mn(％):        0.40～0.70
P(％)≤:        0.035
S(％)≤:        0.035
Cr(％) :       1.20～1.50
Mo(％) :       0.50～0.70

Heat Treatment(42CrMo5-6):
Heat treatment ching symbol:   +QT
Normalizing, quen or solution annealing temperature °C:   840 to 870
Type of cooling:   oil
Tempering or precipitation treatment temperature:   600 to 700

Mechanical Properties at Room Temperature(42CrMo5-6):
Heat Treatment Condition:    +S/+A
Hardness HB Max:    255/241
Heat Treatment Condition:    +QT
Diameter mm:   ≤100/100 Minimum 0,2 %-proof strength values at 50°C:   681/625
Minimum 0,2 %-proof strength values at 100°C:   662/605
Minimum 0,2 %-proof strength values at 150°C:   639/584
Minimum 0,2 %-proof strength values at 200°C:   616/563
Minimum 0,2 %-proof strength values at 250°C:   601/549
Minimum 0,2 %-proof strength values at 300°C:   585/535
Minimum 0,2 %-proof strength values at 350°C:   570/521
Minimum 0,2 %-proof strength values at 400°C:   547/500
Minimum 0,2 %-proof strength values at 450°C:   516/472
Minimum 0,2 %-proof strength values at 500°C:   462/422

Remark(42CrMo5-6):
1, + S = treated for cold shearing; + A = soft annealed.
2, Standard: NF EN 10269

Introduction Cold Working Tool Steel(42CrMo5-6)
The person or organization that orders products in accordance with this standard. Thepurchaser is not necessarily, but may be, a manufacturer of pressure equipment in accordance with theEU Directive listed in Annex ZA. Where a purchaser has responsibilities under this EU Directive, thisstandard will provide a presumption of conformity with the essential requirements of the Directive soidentified in Annex ZA.
The nominal dimensions and tolerances on dimensions for the products shall be agreed at the time ofenquiry and order with reference to the dimensional standards listed.
This document defines the steel and nickel alloy grades for fasteners used at ele-vated and/or low temperatures and delivered as billets, bars and wire rods. It specifies the chemical composition and mechanical and technological characteristics of these steels.
The following information shall be supplied by the purchaser at the time of enquiry and order(42CrMo5-6):
a)the quantity required (mass or number of pieces);
b)the type of product;
c) the European Standard specifying the tolerances on dimensions and shape (see clause 4) andthe tolerance of mass and, if the relevant European Standard permits the purchaser certainoptions, e.g. regarding edge finishes or tolerance classes, specific information on theseaspects;
d)the nominal dimensions of the product;
e) the number of this European Standard;
f)the material name or number;
g)the delivery condition;
h)the surface quality class;
i) the type of inspection document).

HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, NAK80
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, 42CrMo5-6