ASTM 1026
2018-04-13 17:57:32
We are a professional manufacturer of ASTM 1026, we can provide the third party inspection report and datasheet of ASTM 1026 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in ASTM 1026. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM 1026| UNS G10260
CHEMICAL COMPOSITION(ASTM 1026):
C(％) : 0.22～0.28
Mn(％) : 0.60～0.90
P(％)≤: 0.04
S(％)≤: 0.05
Remark(ASTM 1026):
1, The normal cold working carbon steel quality grade of ASTM standard is consult ASTMA108-1999, the chemical component is not different with this table.
2, The special hot working carbon steel quality grade of ASTM standard is consult ASTMA576(90b)(2000), the chemical component is not different with this table.
3, If you ask the Si component, please choose below four options: Si≤0.10％，Si0.10～0.20％，Si0.20～0.40％，Si0.30～0.60％.
4, If you ask the Cu component, it should be under 0.20%.
5, The standard is ASTM A29/29M(1999).
Please find the PDF for ASTM 1026
Introduction structural steel (ASTM 1026)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(ASTM 1026)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM 1026
Steel Grade: ASTM 1026| UNS G10260
CHEMICAL COMPOSITION(ASTM 1026):
C(％) : 0.22～0.28
Mn(％) : 0.60～0.90
P(％)≤: 0.04
S(％)≤: 0.05
Remark(ASTM 1026):
1, The normal cold working carbon steel quality grade of ASTM standard is consult ASTMA108-1999, the chemical component is not different with this table.
2, The special hot working carbon steel quality grade of ASTM standard is consult ASTMA576(90b)(2000), the chemical component is not different with this table.
3, If you ask the Si component, please choose below four options: Si≤0.10％，Si0.10～0.20％，Si0.20～0.40％，Si0.30～0.60％.
4, If you ask the Cu component, it should be under 0.20%.
5, The standard is ASTM A29/29M(1999).
Please find the PDF for ASTM 1026
Introduction structural steel (ASTM 1026)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(ASTM 1026)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM 1026
