ASTM M1008
2018-04-28 16:36:56
We are a professional manufacturer of ASTM M1008, we can provide the third party inspection report and datasheet of ASTM M1008 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in ASTM M1008. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM M1008
CHEMICAL COMPOSITION(ASTM M1008):
C(％) : ≤0.10
Mn(％) : 0.25～0.60
P(％)≤: 0.04
S(％)≤: 0.05
Remark(ASTM M1008):
1, If you don't mind, the Mn component will be exceeded 0.60% to reach 0.75%, then each the Mn component added 0.05%, the C component will be reduced 0.01%.
2, The standard is ASTM A29/29M(1999) and SAE J403(1995).
Please find the PDF for ASTM M1008
Introduction structural steel (ASTM M1008)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(ASTM M1008)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM M1008
Steel Grade: ASTM M1008
CHEMICAL COMPOSITION(ASTM M1008):
C(％) : ≤0.10
Mn(％) : 0.25～0.60
P(％)≤: 0.04
S(％)≤: 0.05
Remark(ASTM M1008):
1, If you don't mind, the Mn component will be exceeded 0.60% to reach 0.75%, then each the Mn component added 0.05%, the C component will be reduced 0.01%.
2, The standard is ASTM A29/29M(1999) and SAE J403(1995).
Please find the PDF for ASTM M1008
Introduction structural steel (ASTM M1008)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(ASTM M1008)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM M1008
The last：
ASTM M1010
Next up：
UNS G15720
