SAE 1060
2018-05-02 16:16:37
We are a professional manufacturer of SAE 1060, we can provide the third party inspection report and datasheet of SAE 1060 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in SAE 1060. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: SAE 1060|UNS G10600
CHEMICAL COMPOSITION(SAE 1060):
C(%) : 0.55~0.66
Mn(%) : 0.60~0.90
P(%)≤: 0.04
S(%)≤: 0.05
Remark(SAE 1060):
1, If you don't mind, the Mn component will be exceeded 0.60% to reach 0.75%, then each the Mn component added 0.05%, the C component will be reduced 0.01%.
2, The standard is ASTM A29/29M(1999) and SAE J403(1995).
Please find the PDF for SAE 1060
Introduction structural steel (SAE 1060)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(SAE 1060)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, SAE 1060
Steel Grade: SAE 1060|UNS G10600
CHEMICAL COMPOSITION(SAE 1060):
C(%) : 0.55~0.66
Mn(%) : 0.60~0.90
P(%)≤: 0.04
S(%)≤: 0.05
Remark(SAE 1060):
1, If you don't mind, the Mn component will be exceeded 0.60% to reach 0.75%, then each the Mn component added 0.05%, the C component will be reduced 0.01%.
2, The standard is ASTM A29/29M(1999) and SAE J403(1995).
Please find the PDF for SAE 1060
Introduction structural steel (SAE 1060)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(SAE 1060)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, SAE 1060