SAE 1012
2018-05-03 17:38:55
We are a professional manufacturer of UNS G10120, we can provide the third party inspection report and datasheet of UNS G10120 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in UNS G10120. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: SAE 1012|UNS G10120
CHEMICAL COMPOSITION(SAE 1012):
C(％) : 0.10～0.15
Mn(％) : 0.30～0.60
P(％)≤: 0.04
S(％)≤: 0.05
Remark(UNS G10120):
1, If you don't mind, the Mn component will be exceeded 0.60% to reach 0.75%, then each the Mn component added 0.05%, the C component will be reduced 0.01%.
2, The standard is ASTM A29/29M(1999) and SAE J403(1995).
Please find the PDF for UNS G10120
Introduction structural steel (UNS G10120)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS G10120)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS G10120
Steel Grade: SAE 1012|UNS G10120
CHEMICAL COMPOSITION(SAE 1012):
C(％) : 0.10～0.15
Mn(％) : 0.30～0.60
P(％)≤: 0.04
S(％)≤: 0.05
Remark(UNS G10120):
1, If you don't mind, the Mn component will be exceeded 0.60% to reach 0.75%, then each the Mn component added 0.05%, the C component will be reduced 0.01%.
2, The standard is ASTM A29/29M(1999) and SAE J403(1995).
Please find the PDF for UNS G10120
Introduction structural steel (UNS G10120)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS G10120)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS G10120
