UNS K11538
2018-05-25 16:20:35
We are a professional manufacturer of UNS K11538, we can provide the third party inspection report and datasheet of UNS K11538 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in UNS K11538. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM A588 Gr.C|UNS K11538
Remark(UNS K11538):
①, The d which is flexural Center Dia is integral multiple as a which is thickness of steel.
②, We can meet any additional conditions within ASTM6 standard.
③, The distance of testing sample is 50mm.
Please find the PDF for UNS K11538
Introduction structural steel (UNS K11538)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS K11538)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS K11538
Steel Grade: ASTM A588 Gr.C|UNS K11538
|
CHEMICAL COMPOSITION(UNS K11538): C(％) : 0.15 Si(％) : 0.15～0.30 Mn(％) : 0.80～1.35 P(％) : 0.04 S(％) : 0.05 Cu(％) : 0.20～0.50 V(％) : 0.01～0.10 Other(％) : Cr0.30～0.50；Ni0.25～0.50 |
MECHANICAL PROPERTIES (UNS K11538): Thickness/mm : 100 100～125 Tensile Strength|σb/MPa : 485 460 Yield Strength|σs≥/MPa : 21 21 Extensibility|δ③(％) : ② ② Cold-bend Test(180℃/L)①: 345 315 Cold-bend Test(180℃/T)①: — — |
①, The d which is flexural Center Dia is integral multiple as a which is thickness of steel.
②, We can meet any additional conditions within ASTM6 standard.
③, The distance of testing sample is 50mm.
Please find the PDF for UNS K11538
Introduction structural steel (UNS K11538)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS K11538)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS K11538
The last：
UNS K11552
Next up：
UNS K12043
