UNS G51150
2019-05-03 18:28:49
We are a professional manufacturer of UNS G51150, we can provide the third party inspection report and datasheet of UNS G51150 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in UNS G51150. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: UNS G51150
CHEMICAL COMPOSITION(UNS G51150):
Remark(UNS G51150): ①,Remnant element:Cr≤0.20％，Mo≤0.06％，Ni≤0.25％，Cu≤0.35％.
②, When the ω(Pb) is between 0.15％ and 0.35％, the steel grade should be added "L" between the second number and the third number.
③, We can supply the steel of ω(Si)≤0.15％, if you want to use it to cold forming parts, please choose ω(Si)≤0.10％.
④, It is boron steel and the ω(B) is 0.0005％～0.003％, can not contain Ti, the max ω(B) is 0.005％.
Please find the PDF for UNS G51150
Introduction structural steel (UNS G51150)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS G51150)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS G51150
Steel Grade: UNS G51150
CHEMICAL COMPOSITION(UNS G51150):
| C(％) | Si(％)③ | Mn(％) | P(％) ≤ | S(％)≤ | Cr(％) | Mo(％) | Ni(％) |
|---|---|---|---|---|---|---|---|
| 0.13～0.18 | 0.15～0.35 | 0.70～0.90 | 0.04 | 0.04 | 0.70～0.90 | — | — |
Remark(UNS G51150): ①,Remnant element:Cr≤0.20％，Mo≤0.06％，Ni≤0.25％，Cu≤0.35％.
②, When the ω(Pb) is between 0.15％ and 0.35％, the steel grade should be added "L" between the second number and the third number.
③, We can supply the steel of ω(Si)≤0.15％, if you want to use it to cold forming parts, please choose ω(Si)≤0.10％.
④, It is boron steel and the ω(B) is 0.0005％～0.003％, can not contain Ti, the max ω(B) is 0.005％.
Please find the PDF for UNS G51150
Introduction structural steel (UNS G51150)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS G51150)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS G51150
The last：
UNS G51170
Next up：
UNS G50460
