ASTM 4037H
2019-05-08 15:56:58
We are a professional manufacturer of ASTM 4037H, we can provide the third party inspection report and datasheet of ASTM 4037H as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in ASTM 4037H. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM 4037H
CHEMICAL COMPOSITION(ASTM 4037H):
Hardness HRC|Distance (ASTM 4037H):
Remark(ASTM 4037H):
1, When the ω(Pb) is between 0.15% and 0.35%, the steel grade should be added "L" between the second number and the third number.
2, The standard is ASTM A304(1996).
Introduction structural steel (ASTM 4037H)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(ASTM 4037H)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM 4037H
Steel Grade: ASTM 4037H
CHEMICAL COMPOSITION(ASTM 4037H):
C(%) | Si(%)③ | Mn(%) | Cr(%) | Mo(%) | Ni(%) | Other(%) |
---|---|---|---|---|---|---|
0.24~0.41 | 0.15~0.35 | 0.60~1.00 | - | 0.20~0.30 | - | - |
Hardness HRC|Distance (ASTM 4037H):
1.6mm | 3.2mm | 4.8mm | 6.4mm | 7.9mm | 9.5mm | 11.1mm | 12.7mm | 14.3mm | 15.9mm |
---|---|---|---|---|---|---|---|---|---|
59~52 | 57~49 | 54~42 | 51~35 | 45~30 | 34~23 | 32~22 | 30~21 | 29~20 | ≥28 |
2, The standard is ASTM A304(1996).
Introduction structural steel (ASTM 4037H)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(ASTM 4037H)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM 4037H
The last:
ASTM 4042H
Next up:
ASTM 4032H