我要啦免费统计

UNS H46210

2019-05-16 11:35:52
We are a professional manufacturer of UNS H46210, we can provide the third party inspection report and datasheet of UNS H46210 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in UNS H46210. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: UNS H46210
CHEMICAL COMPOSITION(UNS H46210):
C(%) Si(%)③ Mn(%)Cr(%)Mo(%)Ni(%)Other(%)
0.17~0.23 0.15~0.35 0.60~1.00 0.20~0.30 1.55~2.00

Hardness HRC|Distance (UNS H46210):
1.6mm 3.2mm 4.8mm 6.4mm 7.9mm 9.5mm 11.1mm 12.7mm 14.3mm 15.9mm
48~41 47~36 46~34 44~30 41~27 34~23 32~22 30~20 ≥28 ≥27
Remark(UNS H46210): 1, When the ω(Pb) is between 0.15% and 0.35%, the steel grade should be added "L" between the second number and the third number.
2, The standard is ASTM A304(1996).

Introduction structural steel (UNS H46210)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS H46210)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.

HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS H46210

Special Steel, Tapping Machine, Cold Heading Machine Supplier in China-Copy Right By Hacer Technology