UNS H47180
2019-05-16 11:35:52
We are a professional manufacturer of UNS H47180, we can provide the third party inspection report and datasheet of UNS H47180 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in UNS H47180. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: UNS H47180
CHEMICAL COMPOSITION(UNS H47180):
Hardness HRC|Distance (UNS H47180):
Remark(UNS H47180):
1, When the ω(Pb) is between 0.15％ and 0.35％, the steel grade should be added "L" between the second number and the third number.
2, The standard is ASTM A304(1996).
Introduction structural steel (UNS H47180)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS H47180)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS H47180
Steel Grade: UNS H47180
CHEMICAL COMPOSITION(UNS H47180):
| C(％) | Si(％)③ | Mn(％) | Cr(％) | Mo(％) | Ni(％) | Other(％) |
|---|---|---|---|---|---|---|
| 0.15～0.21 | 0.15～0.35 | 0.60～0.95 | 0.30～0.60 | 0.30～0.40 | 0.85～1.25 | － |
Hardness HRC|Distance (UNS H47180):
| 1.6mm | 3.2mm | 4.8mm | 6.4mm | 7.9mm | 9.5mm | 11.1mm | 12.7mm | 14.3mm | 15.9mm |
|---|---|---|---|---|---|---|---|---|---|
| 47～40 | 47～40 | 46～38 | 43～33 | 40～29 | 36～26 | 33～24 | 32～23 | 31～22 | 30～22 |
2, The standard is ASTM A304(1996).
Introduction structural steel (UNS H47180)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(UNS H47180)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, UNS H47180
The last：
UNS H47200
Next up：
UNS H46260
