RiverAce 80
2020-04-28 20:40:33
We are a professional manufacturer of RiverAce 80, we can provide the third party inspection report and datasheet of RiverAce 80 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in RiverAce 80. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: RiverAce 80
Remark(RiverAce 80):
Introduction structural steel (RiverAce 80)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(RiverAce 80)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, RiverAce 80
Steel Grade: RiverAce 80
|
CHEMICAL COMPOSITION(RiverAce 80): C(％) : 0.18 Si(％) : 0.15～0.35 Mn(％) : 1 Cr(％): 0.8 Ni(％) : 1 Mo(％) : 0.6 Cu(％) : 0.5 V(％) : 0.08 Other(％) : B0.006 |
MECHANICAL PROPERTIES (RiverAce 80): Thickness/mm : 50 Tensile Strength|σb/MPa : ； ;784 Yield Strength|σs≥/MPa : 686 Extensibility|δ③(％) : 20 |
Introduction structural steel (RiverAce 80)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(RiverAce 80)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, RiverAce 80
The last：
Welten 50
Next up：
RiverAce 70
