Welten 80
2020-04-28 20:40:33
We are a professional manufacturer of Welten 80, we can provide the third party inspection report and datasheet of Welten 80 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in Welten 80. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: Welten 80
Remark(Welten 80):
Introduction structural steel (Welten 80)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(Welten 80)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, Welten 80
Steel Grade: Welten 80
|
CHEMICAL COMPOSITION(Welten 80): C(％) : 0.18 Si(％) : 0.15～0.35 Mn(％) : 0.60～1.20 Cr(％): 0.40~0.80 Ni(％) : 1.5 Mo(％) : 0.6 Cu(％) : 0.15～0.50 V(％) : 0.1 Other(％) : B0.006 |
MECHANICAL PROPERTIES (Welten 80): Thickness/mm : 50 Tensile Strength|σb/MPa : ； ;784 Yield Strength|σs≥/MPa : 686 Extensibility|δ③(％) : 20 |
Introduction structural steel (Welten 80)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(Welten 80)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, Welten 80
The last：
Welten 80C
Next up：
Welten 60
