Welten 100N
2020-04-28 20:40:33
We are a professional manufacturer of Welten 100N, we can provide the third party inspection report and datasheet of Welten 100N as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in Welten 100N. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: Welten 100N
Remark(Welten 100N):
Introduction structural steel (Welten 100N)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(Welten 100N)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, Welten 100N
Steel Grade: Welten 100N
|
CHEMICAL COMPOSITION(Welten 100N): C(％) : 0.18 Si(％) : 0.15～0.35 Mn(％) : 0.60～1.20 Cr(％): 0.40~0.80 Ni(％) : 1.5 Mo(％) : 0.6 Cu(％) : 0.15～0.50 V(％) : 0.1 Other(％) : |
MECHANICAL PROPERTIES (Welten 100N): Thickness/mm : 32 Tensile Strength|σb/MPa : ； ;784 Yield Strength|σs≥/MPa : 882 Extensibility|δ③(％) : 20 |
Introduction structural steel (Welten 100N)
Structural steel is a steel that conforms to a specific strength and formability grade. The formability is expressed as the elongation at the end of the tensile test. Structural steel is generally used for bearing and other purposes. In these uses, the strength of steel is an important design standard.
Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.
Application(Welten 100N)
Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, Welten 100N
The last：
YAW-TEN 50
Next up：
Welten 80C
