1.3243
2018-03-20 17:29:21
We are a professional manufacturer of 1.3243, we can provide the third party inspection report and datasheet of 1.3243 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in 1.3243. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: S6-5-2-5 | Material No.: 1.3243
CHEMICAL COMPOSITION(1.3243):
C(％) : 0.88～0.96
Si(％) : ≤0.45
Mn(％) : ≤0.40
P(％)≤: 0.03
S(％)≤: 0.03
Cr(％) : 3.80～4.50
Mo(％) : —
V(％) : —
W(％) : —
Co(％) : —
HARDNESS AND HEAT TREATMENT(1.3243):
Hot Working/℃: 1100～900
Annealing/℃: 790～820
Annealing Hardness HBS: 240～300
Quench/℃|Heating: 450～600
Quench/℃|First Preheating: 850
Quench/℃|Second Preheating: 1050
Quench/℃|Finally Heating: 1200～1240
Temper/℃: 550～570
Temper Hardness≥HRC: 64
Remark(1.3243):
-
Introduction High Speed Tool Steel (1.3243)
High speed tool steel is used to produce high efficiency cutting tools. Because of its red hardness, high wear resistance and high strength, it is also used for moulds, rollers, high temperature bearings and high temperature springs with high performance requirements. The hardness of high speed tool steel after heat treatment can reach more than HRC63. It can still maintain high hardness at about 600 C, and its toughness, wear resistance and heat resistance are all good. The main alloy elements of the high speed tool steels annealed are tungsten, molybdenum, chromium, vanadium, and some of the high speed tool steels are added to the elements such as cobalt and aluminum.
Application(1.3243)
It is often used in power-saw blades and drill bits. It is superior to the older high-carbon steel tools used extensively through the 1940s in that it can withstand higher temperatures without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high-speed steel. At room temperature, in their generally recommended heat treatment, HSS grades generally display high hardness (above Rockwell hardness 60) and abrasion resistance (generally linked to tungsten and vanadium content often used in HSS) compared with common carbon and tool steels.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, NAK80
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, 1.3243
Steel Grade: S6-5-2-5 | Material No.: 1.3243
CHEMICAL COMPOSITION(1.3243):
C(％) : 0.88～0.96
Si(％) : ≤0.45
Mn(％) : ≤0.40
P(％)≤: 0.03
S(％)≤: 0.03
Cr(％) : 3.80～4.50
Mo(％) : —
V(％) : —
W(％) : —
Co(％) : —
HARDNESS AND HEAT TREATMENT(1.3243):
Hot Working/℃: 1100～900
Annealing/℃: 790～820
Annealing Hardness HBS: 240～300
Quench/℃|Heating: 450～600
Quench/℃|First Preheating: 850
Quench/℃|Second Preheating: 1050
Quench/℃|Finally Heating: 1200～1240
Temper/℃: 550～570
Temper Hardness≥HRC: 64
Remark(1.3243):
-
Introduction High Speed Tool Steel (1.3243)
High speed tool steel is used to produce high efficiency cutting tools. Because of its red hardness, high wear resistance and high strength, it is also used for moulds, rollers, high temperature bearings and high temperature springs with high performance requirements. The hardness of high speed tool steel after heat treatment can reach more than HRC63. It can still maintain high hardness at about 600 C, and its toughness, wear resistance and heat resistance are all good. The main alloy elements of the high speed tool steels annealed are tungsten, molybdenum, chromium, vanadium, and some of the high speed tool steels are added to the elements such as cobalt and aluminum.
Application(1.3243)
It is often used in power-saw blades and drill bits. It is superior to the older high-carbon steel tools used extensively through the 1940s in that it can withstand higher temperatures without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high-speed steel. At room temperature, in their generally recommended heat treatment, HSS grades generally display high hardness (above Rockwell hardness 60) and abrasion resistance (generally linked to tungsten and vanadium content often used in HSS) compared with common carbon and tool steels.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, NAK80
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, 1.3243
