W5
2018-04-11 20:09:48
We are a professional manufacturer of W5, we can provide the third party inspection report and datasheet of W5 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in W5. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM W5| UNS: T72305
Remark(W5):
Please find the PDF for W5
Introduction Cemented Carbide (W5)
Cemented carbide is made of refractory metal hard compound and binding metal through powder metallurgy technology made of an alloy material.
Cemented carbide with high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance, even under the temperature of 500 ℃ is basic remains the same, there are still very high hardness at 1000 ℃.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, W5
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13,
Steel Grade: ASTM W5| UNS: T72305
|
CHEMICAL COMPOSITION(W5): C(％) : 1.05～1.15 Si(％) : 0.10～0.40 Mn(％) : 0.10～0.40 P(％)≤: 0.03 S(％)②: 0.03 Cr(％) : 0.40～0.60 V(％) : ≤0.10 Other: Ni≤0.20％；Cu≤0.20％；W≤0.15％；Mo≤0.10％ |
HARDNESS AND HEAT TREATMENT (W5): Hardness HBS|After Annealing: 202 Hardness HBS|After Cold Drawing: 241 Carbon Content(％): 1.05～1.15 Quenching℃: 802 Cooling: Brine Quenching Hardness≥HRC: 65 |
Please find the PDF for W5
Introduction Cemented Carbide (W5)
Cemented carbide is made of refractory metal hard compound and binding metal through powder metallurgy technology made of an alloy material.
Cemented carbide with high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance, even under the temperature of 500 ℃ is basic remains the same, there are still very high hardness at 1000 ℃.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, W5
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13,
