我要啦免费统计

W1-C

2018-04-11 20:40:27
We are a professional manufacturer of W1-C, we can provide the third party inspection report and datasheet of W1-C as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in W1-C. We will serve you with honesty, integrity, and professional. The detail data as below follow: 
Steel Grade: ASTM W1-C| UNS: T72301
CHEMICAL COMPOSITION(W1-C): 
C(%) :         ①
Si(%) :        0.10~0.40
Mn(%) :         0.10~0.40
P(%)≤:         0.03
S(%)②:         0.03
Cr(%) :         ≤0.30
V(%) :         ≤0.10
Other:         Ni≤0.20%;Cu≤0.20%;W≤0.15%;Mo≤0.10%
HARDNESS AND HEAT TREATMENT (W1-C):
Hardness HBS|After Annealing:         202
Hardness HBS|After Cold Drawing:         241
Carbon Content(%):         0.70~0.85
Quenching℃:         802
Cooling:         Brine
Quenching Hardness≥HRC:         64
Remark(W1-C): 

Please find the PDF for W1-C  
Introduction Cemented Carbide (W1-C)
Cemented carbide is made of refractory metal hard compound and binding metal through powder metallurgy technology made of an alloy material.
Cemented carbide with high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance, even under the temperature of 500 ℃ is basic remains the same, there are still very high hardness at 1000 ℃.

HOT SALE: 
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, W1-C
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13

Special Steel, Tapping Machine, Cold Heading Machine Supplier in China-Copy Right By Hacer Technology