W108 Special
2018-04-12 19:39:57
We are a professional manufacturer of W108 Special, we can provide the third party inspection report and datasheet of W108 Special as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in W108 Special. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM W108 Special
Remark(W108 Special):
①, It will be used this temperature if the ω(C) is between 0.50％～1.25％, it should be used the lower limit temperature if the ω(C) is between 1.25％～1.40％.
②, It will be used 740～760℃ if the ω(C) is between 0.60％～0.90％, it should be used 760～790℃ if the ω(C) is between 0.90％～1.40％.
③, It will be used 790～840℃ if the ω(C) is between 0.60％～0.80％, it should be used 770～840℃ if the ω(C) is between 0.85％～1.05％, it should be used 760～830℃ if the ω(C) is between 1.10％～1.40％.
④, The chemical composition which have parenthesis means Si＋Mn＋Cr≤0.75％.
⑤, The AISI W108、W109、W110、W112 are same as UNS T72301, the AISI W209、W210 are same as UNS T72302, the AISI W5 is same as UNS T72305.
⑥, The composition of P,S and residual elements is follow: P≤0.025％；S≤0.025％；Cu≤0.20％.
Please find the PDF for W108 Special
Introduction Cemented Carbide (W108 Special)
Cemented carbide is made of refractory metal hard compound and binding metal through powder metallurgy technology made of an alloy material.
Cemented carbide with high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance, even under the temperature of 500 ℃ is basic remains the same, there are still very high hardness at 1000 ℃.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, W108 Special
Steel Grade: ASTM W108 Special
|
CHEMICAL COMPOSITION(W108 Special): C(％) : ② Si(％) : 0.10～0.40 Mn(％) : 0.10～0.40 Cr(％): 0.03 V(％): 0.03 |
HARDNESS AND HEAT TREATMENT (W108 Special): Initial Forging Temperature/℃: 980～1070 Finish Forging Temperature/℃: 820 Annealing/℃: 740～760 Hardness HBS|After Annealing : 159～202 Quenching/℃: 790～840 Quenching Medium: Brine or Water Tempering/℃: 150～340 Hardness HBS|After Tempering: 65～50 |
①, It will be used this temperature if the ω(C) is between 0.50％～1.25％, it should be used the lower limit temperature if the ω(C) is between 1.25％～1.40％.
②, It will be used 740～760℃ if the ω(C) is between 0.60％～0.90％, it should be used 760～790℃ if the ω(C) is between 0.90％～1.40％.
③, It will be used 790～840℃ if the ω(C) is between 0.60％～0.80％, it should be used 770～840℃ if the ω(C) is between 0.85％～1.05％, it should be used 760～830℃ if the ω(C) is between 1.10％～1.40％.
④, The chemical composition which have parenthesis means Si＋Mn＋Cr≤0.75％.
⑤, The AISI W108、W109、W110、W112 are same as UNS T72301, the AISI W209、W210 are same as UNS T72302, the AISI W5 is same as UNS T72305.
⑥, The composition of P,S and residual elements is follow: P≤0.025％；S≤0.025％；Cu≤0.20％.
Please find the PDF for W108 Special
Introduction Cemented Carbide (W108 Special)
Cemented carbide is made of refractory metal hard compound and binding metal through powder metallurgy technology made of an alloy material.
Cemented carbide with high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance, even under the temperature of 500 ℃ is basic remains the same, there are still very high hardness at 1000 ℃.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, W108 Special
The last：
W109 Special
Next up：
W310 Extra
