AISI S1
2018-04-15 21:31:54
We are a professional manufacturer of AISI S1, we can provide the third party inspection report and datasheet of AISI S1 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI S1. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI S1| UNS: T41901
Remark(AISI S1):
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI S1
Introduction Alloy Tool Steel (AISI S1)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI S1
Steel Grade: AISI S1| UNS: T41901
|
CHEMICAL COMPOSITION(AISI S1): C(％) : 0.45～0.55 Si(％) : 0.25～0.45 Mn(％) : 0.20～0.40 Cr(％) : 1.25～1.75 Mo(％) : 0.40 V(％) : 0.15～0.30 W(％) : 1.00～3.00 Other(％) : — |
HARDNESS AND HEAT TREATMENT (AISI S1): Initial Forging Temperature/℃: 1010～1120 Finish Forging Temperature/℃: 870 Annealing/℃: 790～820 Hardbess HBS|After Annealing : 183～229① Quenching/℃: 900～980 Quenching Medium : Oil Tempering/℃: 200～650 Hardbess HBC|After Tempering : 58～40 |
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI S1
Introduction Alloy Tool Steel (AISI S1)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI S1
