AISI O1
2018-04-17 19:17:41
We are a professional manufacturer of AISI O1, we can provide the third party inspection report and datasheet of AISI O1 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI O1. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI O1| UNS: T31501
Remark(AISI O1):
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI O1
Introduction Alloy Tool Steel (AISI O1)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI O1
Steel Grade: AISI O1| UNS: T31501
|
CHEMICAL COMPOSITION(AISI O1): C(％) : 0.85～0.95 Si(％) : 0.20～0.40 Mn(％) : 1.00～1.30 Cr(％) : 0.40～0.60 Mo(％) : — V(％) : 0.20 W(％) : 0.40～0.60 Other(％) : — |
HARDNESS AND HEAT TREATMENT (AISI O1): Initial Forging Temperature/℃: 980～1070 Finish Forging Temperature/℃: 840 Annealing/℃: 760～790 Hardbess HBS|After Annealing : 183～212 Quenching/℃: 790～820 Quenching Medium : Oil Tempering/℃: 150～260 Hardbess HBC|After Tempering : 62～57 |
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI O1
Introduction Alloy Tool Steel (AISI O1)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI O1
