We are a professional manufacturer of AISI A8, we can provide the third party inspection report and datasheet of AISI A8 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI A8. We will serve you with honesty, integrity, and professional. The detail data as below follow: 
Steel Grade: AISI A8| UNS: T30108

CHEMICAL COMPOSITION(AISI A8):  C(％) :        0.55 Si(％) :        0.20～0.40 Mn(％) :        0.20～0.40 Cr(％) :        5.00 Mo(％) :        1.25 V(％) :        — W(％) :        1.25 Other(％) :        —

HARDNESS AND HEAT TREATMENT (AISI A8): Initial Forging Temperature/℃:        1090～1150 Finish Forging Temperature/℃:        — Annealing/℃:        830～845 Hardbess HBS|After Annealing :        — Quenching/℃:        995～1010 Quenching Medium :        Air Tempering/℃:        150～590 Hardbess HBC|After Tempering :        61～49

Remark(AISI A8): 
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI A8  

---

Introduction Alloy Tool Steel (AISI A8)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.

---

HOT SALE: 
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13,  AISI A8