AISI D5
2018-04-18 19:54:29
We are a professional manufacturer of AISI D5, we can provide the third party inspection report and datasheet of AISI D5 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI D5. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI D5| UNS: T30405
Remark(AISI D5):
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI D5
Introduction Alloy Tool Steel (AISI D5)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI D5
Steel Grade: AISI D5| UNS: T30405
|
CHEMICAL COMPOSITION(AISI D5): C(％) : 1.40～1.60 Si(％) : 0.30～0.50 Mn(％) : 0.30～0.50 Cr(％) : 11.0～13.0 Mo(％) : 0.70～1.20 V(％) : (0.80) W(％) : — Other(％) : — |
HARDNESS AND HEAT TREATMENT (AISI D5): Initial Forging Temperature/℃: 1010～1090 Finish Forging Temperature/℃: 930 Annealing/℃: 870～900 Hardbess HBS|After Annealing : 223～255 Quenching/℃: 980～1020 Quenching Medium : Air Tempering/℃: 200～540 Hardbess HBC|After Tempering : 61～54 |
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI D5
Introduction Alloy Tool Steel (AISI D5)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI D5
