AISI H15
2018-04-18 19:54:29
We are a professional manufacturer of AISI H15, we can provide the third party inspection report and datasheet of AISI H15 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI H15. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI H15| UNS: —
Remark(AISI H15):
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI H15
Introduction Alloy Tool Steel (AISI H15)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI H15
Steel Grade: AISI H15| UNS: —
|
CHEMICAL COMPOSITION(AISI H15): C(％) : 0.45～0.55 Si(％) : 0.40～0.60 Mn(％) : 0.10～0.40 Cr(％) : 3.50～4.00 Mo(％) : 6.00～6.50 V(％) : 0.65～0.85 W(％) : 0.85～1.15 Other(％) : — |
HARDNESS AND HEAT TREATMENT (AISI H15): Initial Forging Temperature/℃: 1070～1150 Finish Forging Temperature/℃: 900 Annealing/℃: 840～870 Hardbess HBS|After Annealing : 207～229 Quenching/℃: 1150～1260 Quenching Medium : Air or Oil Tempering/℃: 590～650 Hardbess HBC|After Tempering : 49～36 |
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI H15
Introduction Alloy Tool Steel (AISI H15)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI H15
