AISI H26
2018-04-18 19:54:29
We are a professional manufacturer of AISI H26, we can provide the third party inspection report and datasheet of AISI H26 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI H26. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI H26| UNS: T20826
Remark(AISI H26):
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI H26
Introduction Alloy Tool Steel (AISI H26)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI H26
Steel Grade: AISI H26| UNS: T20826
|
CHEMICAL COMPOSITION(AISI H26): C(％) : 0.50 Si(％) : 0.20～0.40 Mn(％) : 0.20～0.40 Cr(％) : 4.00 Mo(％) : — V(％) : 1.00 W(％) : 18.00 Other(％) : — |
HARDNESS AND HEAT TREATMENT (AISI H26): Initial Forging Temperature/℃: 1040～1120 Finish Forging Temperature/℃: 950 Annealing/℃: 870～900 Hardbess HBS|After Annealing : 217～241 Quenching/℃: 1180～1260 Quenching Medium : Saline、Oil or Air Tempering/℃: 570～680 Hardbess HBC|After Tempering : 58～43 |
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI H26
Introduction Alloy Tool Steel (AISI H26)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH,
ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400,
X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321,
NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418,
616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405,
ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI H26
