AISI F1
2018-04-21 16:18:04
We are a professional manufacturer of AISI F1, we can provide the third party inspection report and datasheet of AISI F1 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in AISI F1. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: AISI F1| UNS: T60601
Remark(AISI F1):
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI F1
Introduction Alloy Tool Steel (AISI F1)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400, X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321, NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418, 616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI F1
Steel Grade: AISI F1| UNS: T60601
CHEMICAL COMPOSITION(AISI F1): C(%) : 0.95~1.25 Si(%) : ≤0.50 Mn(%) : ≤0.50 Cr(%) : — Mo(%) : — V(%) : — W(%) : 1.00~1.75 Other(%) : — |
HARDNESS AND HEAT TREATMENT (AISI F1): Initial Forging Temperature/℃: 980~1090 Finish Forging Temperature/℃: 840 Annealing/℃: 760~800 Hardbess HBS|After Annealing : 183~207 Quenching/℃: 790~870 Quenching Medium : Water or Saline Tempering/℃: 150~260 Hardbess HBC|After Tempering : 64~60 |
①, The temperature is after carburization.
②, It is surface hardness after carburization.
③, Aging treatment.
Please find the PDF for AISI F1
Introduction Alloy Tool Steel (AISI F1)
Alloy tool steel, carbon tool steel with Si, Mn, Ni, Cr, Mo, V, W and other alloy elements in order to improve the hardenability and toughness, wear resistance and heat resistance of steel.Add Cr and Mn can improve the hardenability of tool steel, according to the requirements, selectively to join or add other elements (adding amount is generally not more than 5%), that is, to form a series of alloy tool steel.It is mainly used in the manufacture of measuring tools and cutters, shock resistant and cold and hot mould and some special purpose tools.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400, X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321, NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418, 616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, AISI F1