ASTM T15
2018-04-26 20:05:47
We are a professional manufacturer of ASTM T15, we can provide the third party inspection report and datasheet of ASTM T15 as round bar, square bar, flat steel and so on. Please send the inquiry to us if you are if you are interested in ASTM T15. We will serve you with honesty, integrity, and professional. The detail data as below follow:
Steel Grade: ASTM T15| UNS: T12015| Type: Tungsten Series
Remark(ASTM T15):
①, ω(Cu＋Ni)≤0.75％
②, The composition of S can be increased to ω(S)0.06％～0.15％ in order to improve the performance of cutting.
③, The standard is ASTM A600-1999.
Please find the PDF for ASTM T15
Introduction High Speed Tool Steel (ASTM T15)
High speed tool steel is mainly used in manufacturing high efficient cutting tool.Due to its high red hardness, good abrasion resistance, high strength characteristics, and also used in the manufacture of high performance requirements of the mould, and hot spring roll, high temperature bearing, etc.The use of high speed tool steel after heat treatment the hardness can reach more than HRC63, under the working temperature of 600 ℃ can still maintain a high hardness, but its toughness, wear resistance and heat resistance are good.Annealing state of high speed tool steel main alloy elements tungsten, molybdenum, chromium, vanadium, and some joined the cobalt in high speed tool steel, aluminum and other elements.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400, X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321, NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418, 616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM T15
Steel Grade: ASTM T15| UNS: T12015| Type: Tungsten Series
|
CHEMICAL COMPOSITION(AISI S1): C(％) : 1.50～1.60 Si(％) : 0.15～0.40 Mn(％) : 0.15～0.40 P(％)≤ : 0.03 S(％)≤② : 0.03 Cr(％) : 3.75～5.00 Mo(％) : ≤1.00 V(％) : 4.50～5.25 W(％) : 11.75～13.0 Co(％): 4.75～5.25 |
HARDNESS AND HEAT TREATMENT (ASTM T15): Hardness HBS|Annealing: 277 Hardness HBS|Cold Drawing: 293 Hardness HBS|Annealing after Cold Drawing: 285 Preheating Temperature/℃: 16～871 Quenching/℃|Salt-Bath Furnace: 1277 Quenching/℃|Controlled Atmosphere Furnace: 1288 Tempering/℃: 538 Hardness≥HRC|After Tempering: 65 |
①, ω(Cu＋Ni)≤0.75％
②, The composition of S can be increased to ω(S)0.06％～0.15％ in order to improve the performance of cutting.
③, The standard is ASTM A600-1999.
Please find the PDF for ASTM T15
Introduction High Speed Tool Steel (ASTM T15)
High speed tool steel is mainly used in manufacturing high efficient cutting tool.Due to its high red hardness, good abrasion resistance, high strength characteristics, and also used in the manufacture of high performance requirements of the mould, and hot spring roll, high temperature bearing, etc.The use of high speed tool steel after heat treatment the hardness can reach more than HRC63, under the working temperature of 600 ℃ can still maintain a high hardness, but its toughness, wear resistance and heat resistance are good.Annealing state of high speed tool steel main alloy elements tungsten, molybdenum, chromium, vanadium, and some joined the cobalt in high speed tool steel, aluminum and other elements.
HOT SALE:
SA-675GR70, SA-387GR91, X6NiCrTiMoVB25-15-2, 17-4PH, 15-5PH, ASTM 630, X3CrNiMo13-4, UNS41500, X10CrNiTi18-10, S17400, X5CrNiCuNbl6-4, 316Ti, 301A, 303, 304L, 310S, 316L, 317L, 321, NKA80, DIN 1.4731, DIN 1.4021, DIN 1.4016, DIN 1.4571, DIN 1.4418, 616, 440B, 440C, 431, 430FR, 430F, 430, 422, 416, 410, 405, ASTM D2, X155CrMoV12-1, ASTM D3, AISI H11, AISI H13, ASTM T15
